Archive Supplies

RemiMount-S
It is a double-sided, self-wound pressure-sensitive permanent high tack mounting adhesive with one silicone release liner. RemiMount S is an all-purpose cold mounting adhesive formulated to give excellent hold-down strength on substrates such as foam or gatorboard and art board. Ideal for permanent mounting of electrostatic, digital prints, ink jet and photographic materials. High Initial tack. Ideal for pre-coating foam/paper substrates. Ideally used in conjunction with a pressure sensitive or thermal laminate to create high quality wide format graphics. May be used indoor or for short term outdoor applications. This self wound mounting adhesive is manufactured with a double sided siliconized, moisture stable release paper. A wide variety of sizes are available. All products are wound on 3" diameter cores unless otherwise specified.

Available Sizes

100.025.300                                         25” x 300’
100.030.300                                         30.5” x 300’
100.031.300                                         31” x 300’
100.033.300                                         33” x 300’
100.038.300                                         38” x 300’
100.041.300                                         41” x 300’
100.043.300                                         43” x 300’
100.051.300                                         51” x 300’
100.055.300                                         55” x 300’
100.061.150                                         61” x 150’

RemiMount Ultra
A permanent solvent acrylic adhesive that incorporates a white 1 mil polypropylene carrier to prevent bleed through when mounting thin prints or media to black or dark colored substrates. This product features a high initial tack adhesive coupled with a moisture stable release liner. Permanent mounting of photographs, prints, drawings or other images on smooth, clean and grease-free backing surfaces made of plastic, metal, or chipboard made of melamin resin. Suitable for use on foam PVC materials. The white carrier minimizes the visibility of dark substrates and enables the image quality, especially in case of thin papers to be maintained. (E.g. bond copies, electrostatic prints). At the same instant, this white carrier assists in producing the smoothest adhesive lay down to reduce any “orange-peel” effect. It also minimizes 'bleed through" on dark or colored substrates. The very best mounting adhesive for permanent applications and outside use for all general graphic output. Ideal for pre-coating most substrates. May be used for indoor or outdoor applications

Available Sizes

102.025.300                                         25” x 300’
102.038.150                                         38” x 150’
102.038.300                                         38” x 300’
102.041.300                                         41” x 300’
102.043.300                                         43” x 300’
102.051.300                                         51” x 300’
102.061.150                                         61” x 150’

RemiMount White
A permanent water-based acrylic adhesive that incorporates a white 2 mil polypropylene carrier to prevent bleed through when mounting thin prints or media to black or dark colored substrates. This product features a high initial tack adhesive coupled with a moisture stable release liner. Permanent mounting of photographs, prints, drawings or other images on smooth, clean and grease-free backing surfaces made of plastic, metal, or chipboard made of melamin resin. Suitable for use on foam PVC materials. The white PVC carrier minimizes the visibility of dark substrates and enables the image quality, especially in case of thin papers to be maintained. (E.g. bond copies, electrostatic prints).

Available Sizes

109.051.400 51” x 400’
109.038.200 38” x 200’

RemiMount Plus
A clear self wound mount film with a permanent aqueous acrylic adhesive and a moisture stable siliconized release liner. This is an excellent general purpose mounting adhesive that will adhere to most substrates.

Available Sizes

51” x 300’

Neschen Gudy©808
Gudy 808 has been reformulated to provide consistently superior results. With its 1 mil white polyester carrier, it provides excellent bleed-through protection for general mounting – especially to dark substrates. A new clay-coated Kraft paper release liner protects the permanent water-based mounting adhesive. This feature allows for tighter roll winding and improved long term storage.

Available Sizes

38” x 200’
51” x 400’

Neschen Gudy©804
Gudy©804 A plasticized 3 mil PVC film coated on both sides with a solvent-free acrylic adhesive. It has an aggressive, permanent adhesive on one side, while the other side allows for repositioning through a unique micro-groove design in the secondary release liner. Gudy© 804 remains removable for up to six months without leaving adhesive residue.

Available Sizes

48” x 164’

Neschen Gudy© Window
Gudy Window - Double-Sided Mounting Adhesive - Now you can mount posters to glass or clear acrylic panels with a simple hand squeegee. Gudy Window is a double-sided mounting adhesive that is designed for bubble-free face mounting. This product consists of a 1 mil polyester film with an aggressive adhesive on one side and a removable adhesive on the other. It is produced with micro-grooves, allowing for easy evacuation of all air bubbles.

Available Sizes

38” x 164’
48” x 164’
51” x 164’

RemiWindow
A double sided self-wound mounting adhesive on a CLEAR carrier with a white, moisture stable release liner. One side (print side) has a permanent adhesive while the other side has a removable adhesive. Ideal for short term indoor graphics or in situations where removablity is a priority.

Available Sizes

27” x 150’
54” x 150’

RemiMount-OC
An optically clear pressure-sensitive mounting adhesive with two polyester film release liners. RemiMount OC is specifically designed for face mounting graphic images in back-lit applications using substrates such as Plexiglas © and/or other transparent products. A very high quality optically clear adhesive enables this product to be used for permanent face mounting to glass, lenticular lenses, and a variety of other substrates that require optimum clarity with a permanent bond.

Available Sizes

104.025.130                          25” x 150’
104.038.150                          38” x 150’
104.051.150                          51” x 150’
104.054.150                          54” x 150’
104.060.150                          60” x 150’

RemiMount-TM
A heat activated self-wound mounting adhesive with a "tacky" surface and one silicone release liner. RemiMount TM is a general use hot mounting adhesive formulated to give excellent hold-down strength on substrates such as foam or gatorboard and art board. With the prepared "tacky" surface, the accurate re-positioning of graphics can be achieved while permanently mounting ink jet, electrostatic and photographic materials. When pre-coated to a substrate, one-pass mounting and laminating can be achieved. This product may also be used in the "decal" method and applied to the back of your printed media at the same time it is being laminated with a thermal laminate. Ideal for pre-coating MOST substrates.

Available Sizes

112.038.328                          38” x 328’
112.041.328                          43” x 328’
112.051.328                          51” x 328’

RemiMount-TM-R
A 1.7 mil standard temperature “High Gloss” finish laminating film on one side with a pressure sensitive removable adhesive on the other. Ideal for encapsulation with any of our thermal laminates to create easy to use graphics. Excellent for creation of easy to mount short term graphics for point of purchase display or advertising. This product is rated for indoor use only in a moisture stable environment.

Available Sizes

50” x 250’

RemiMount-DM
RemiMount DM is a general use heat-activated dry mounting tissue for use in heat press equipment. It is breathable and reversible with a dwell time of 2-3 minutes at temperatures between 165oF (73.8oC) and 175oF (79.4oC). This product can be removed or re-positioned at 200oF (93.3oC). Excellent for mounting photographs, electrostatic images and plain paper to foam board or gatorboard. This product is ideal for the framing or reprographics industry. It is an economical product that is easy to use. This product is also available in cut sheet sizes.

Available Sizes

110.024.150                                      24.5” x 150
110.024.300                                      24.5” x 300’
110.040.150                                      40.5” x 150’
110.040.300                                      40.5” x 300’
110.048.150                                      48.5” x 150’
110.048.300                                      48.5” x 300’

RemiMount-DM Plus
RemiMount DM Plus is an extremely high quality heat-activated dry mounting tissue.

RemiMount DM plus is a premium quality, multi-purpose 3.0 mil (75 micron) dry mounting tissue. This permanent, breathable tissue is recommended for bonding resin-coated photographs, posters and printed materials to most smooth surface substrates. The pH-neutral heat-activated adhesive will bond at temperatures as low as 185°F (85°C).

SUGGESTED APPLICATIONS:
RemiMount DM plus is suitable for use in all makes of dry mounting presses. RemiMount DM plus is recommended for bonding RC photographic paper and printed materials to smooth surfaces. It equals or surpasses all dry mounting tissues on the market. Ideal for reprographics shops, legal artwork, and frame shops

TECHNICAL SPECIFICATIONS:
Carrier: Paper/off–white
Bond: Permanent
Base: Solvent Acrylic
Temperature: 185°F-212°F (85°C–100°C)
Dwell Time: 1-2 minutes, depending on your application requirements. i/e thickness of paper, substrate, etc.

Available Sizes

111.024.150                                      24.5” x 150
111.024.300                                      24.5” x 300’
111.036.300                                      36” x 300’
111.040.150                                      40.5” x 150’
111.040.300                                      40.5” x 300’
111.042.150                                      42.5” x 150’
111.042.300                                      42.5” x 300’
111.048.150                                      48.5” x 150’
111.048.300                                      48.5” x 300’

RemiMount-DM (cut sheets)
RemiMount DM is a general use heat-activated dry mounting tissue for use in heat press equipment. It is breathable and reversible with a dwell time of 2-3 minutes at temperatures between 165oF (73.8oC) and 175oF (79.4oC). This product can be removed or re-positioned at 200oF (93.3oC). Excellent for mounting photographs, electrostatic images and plain paper to foam board or gatorboard. This product is ideal for the framing or reprographics industry. It is an economical product that is easy to use. Cut sheets come in boxes of 1000 sheets.

Available Sizes

110.008.011-A 8.5” x 11” x 1000 sheets
110.008.011-B 8.5 x 11.75 x 1000 sheets